- 2 rows of 14 multicolor LED matrixes (8*8 pixels) displaying multifont characters and graphics symbols
- each row can display up to 18 characters of 5*7 dots.
- Strings of characters can be displayed in red, yellow, green or amber colour , in fixed or blinking mode
- 8 user defineable graphic symbols (56*16 pixels) can be stored in non-volatile memory and displayed with the same options as for text
- Graphics and text can be combined in the same display
- Half-duplex RS485 multidrop interface, up to 32 stations addressable, 9600 to 19200 bauds rate
- Address and baud-rate selection via dip-switches
- ASCII/ European characters set available as standard, other fonts including Greek, Cyrillic, Korean Hangul, GB3212 Chinese available as an option
- 110 or 220 VAC supply voltage
- STX-ETX based protocol with checksum and acknowledge message
| Display Type |
2 rows of 14 multicolor LED matrixes (8x8 pixels each) |
| Text display configuration | 2 lines * 18 characters of 5*7 dots |
| Graphic display configuration | up to 8 symbols (56*16 pixels each) user defineable and stored in non-volatile memory |
| Display modes | Symbols and characters can be displayed in red, yellow, green or amber colour , in fixed or blinking mode |
| Mechanical dimensions | 923,5 mm (W) * 197,8 mm (H) * 110mm (D) |
| Electrical | 220VAC 50Hz supply 90VA power consumption |
| Interface | RS485 half duplex selectable 9600 or 19200 baud, 1 start bit, 8 data bits, 1 stop bit, no parity multidrop up to 32 nodes |
| Protocol | STX-ETX based protocol with checksum and acknowledge message |
| Setup | Dip-switches for address and baud rate configuration |
Contact Brelco
for more information.