|
|
| GD series / Remote Display Units |
| |
- Display module based on 240 * 64 pixels graphic LCM
- 2 lines * 20 characters or 4 lines * 20 characters available
as standard, other configurations on request
- Characters height 7.38mm ( 4 * 20 model), 9.6 mm ( 2 * 20 model
)
- STN / FSTN LCD, yellow/green or white LED backlighting
- Positive and reverse display mode with dip-switches preset
- Half-duplex RS485 multidrop interface, up to 256 stations addressable,
9600 to 19200 bauds rate
- Address and baud-rate selection via dip-switches
- ASCII / European characters set available as standard, other
fonts including Greek, Cyrillic, Korean Hangul, GB3212 Chinese
available on demand.
- 11-30VDc supply voltage
- LEDs indicators for communication and power supply
- STX-ETX based protocol with checksum and acknowledge message
|
| |
| |
| |
Display Type
|
240 * 64 pixels graphic FSTN / STN LCD with Yellow-green
or white LED backlighting |
| Text display configuration |
4 lines * 20 characters ( 7.38mm )
or 2 lines * 20 characters ( 9.6 mm ) |
| Mechanical dimensions |
180 mm (W) * 65 mm (H) * 42 mm (D) |
| Electrical |
11..30VDc supply 3W power consumption
(yellow-green backlight) 1W power consumption (white backlight) |
| Interface |
RS485 half duplex selectable 9600
or 19200 baud, 1 start bit, 8 data bits, 1 stop bit, no parity
multidrop up to 256 nodes |
| Protocol |
STX-ETX based protocol with checksum
and acknowledge message |
| Setup |
Dip-switches for address, baud rate and direct
/ reverse mode configuration |
|
| |
| |
| |
| |
| |
