Products > F&S > NetDCU > NetDCU10
NetDCU10 - Single Board Computer

NetDCU10 is based on the successful concept of NetDCU8. High CPU-power at low power consumption, compact form factor, multiple interfaces and low price level are the benefits of NetDCU10 single board computer. CPU from Samsung (ARM9) running with 400 MHz is used. NetDCU10 benefits of low power fanless design. Additional features are the on board CAN2.0, interface and SD-Card-Slot for easy memory expansion. The overall system cost is reduced by the integrated peripherals. Flexible and easy to configur LCD-Display-Interface are the special benefit of F&S Single Board Computers. Additional interfaces are: Touch- Panel-, Matrix- Keyboard-, RS232- and Ethernet-Interface.


Windows CE

WindowsCE 5.0 supports development of application software in C++, C# and VB.NET. This is the easiest migration way from PC to an embedded system like NetDCU10. Solving future requirements with TCP/IP, DCOM and XML is possible.
 
Technical Data NetDCU10

Power supply

+5VDC/±5%

Current consumption

<500mA (without display,VEE out)

Contrast voltage

±5V to ±28V

Touch-Screen

4 wire, anlogue resistive

Keyboard

8 x 12 Matrix keyboard

In-/Output

max. 21 I/O-Ports
alternative matrix keyboard
8 bit Extension interface (FS-Bus)

Serial ports

3x RS232 (1x with RTS/CTS)
2x USB1.1 (1x Host/Device)
1x Ethernet 10/100 MBit (option)
1x CAN2.0 (option)

SD-Card-Slot

 

LCD-Interface

STN:   up 640 x 480 Pixel, Single/Dual, 16 gray levels
CSTN: up 640 x 480 Pixel Single/Dual, 16/256 colors of 65536
TFT:   up 640 x 480 Pixel, 256/65536 colors

RAM

32 MByte SDRAM, optional 64/128 MByte

>Program memory

16 MByte Flash, optional 32/64/128 MByte

Processor

S3C2440-400

Operating temperature

0°C...70°C, optional -25°C...85°C

Dimensions

100mm x 80mm x 10mm (l x b x h)

Weight

60g

Contact Brelco for more information.