|
|
| NetDCU11 - Single Board Computer |
| |
| |
|
The NetDCU11 complements NetDCU family with another unit, with the
potentiality to plug in display with a resolution of 800x600. In
addition to standard interfaces such as RS232, LCD, touch and Ethernet,
the module also has a CAN 2.0 controller and an audio codec. With
the help of the audio codec is a voice over IP (VOIP) connection
to another computer is possible. A CAN open stack is also available
for the integrated CAN controller. The standard memory of 64 MB
Flash and 64 MB SDRAM is sufficient for almost all application.
The used ARM9 CPU (PXA270) runs with a clock frequency of 520MHz
and can be more challenging screen quickly calculate expenditures.
|
 |
Windows CE
On the NetDCU11, is the latest version of Windows CE from Microsoft
in use. As with all NetDCU's the operating system is already
installed on the board. The boot phase is less than 10 seconds.
Now you can used the supplied tools to design easier the display
and configured your interface. The programming is done with
the tool Visual Studio 2005 in C++, C# or VB.NET. Expertise
from the PC can be easily transfer in the embedded World. The
display driver for the NetDCU11 is optimized for the CPU in
use and supports Direct 3D Mobile (D3DM). Also offered the safe
Flash File System F3S for the NetDCU11.
|
|
|
| |
Linux
Emlix Embedded Linux for the NetDCU11 is preinstalled and
preconfigured and includes the boot loader u-Boot with comfortable
LCD-Selection, the Linux kernel with all the necessary drivers
for LCD, touch panel, NOR and NAND Flash, Ethernet, RTC, audio
AC97, USB, serial FS-Bus, digital I / O and Matrix Keyboard
support. It also includes a initrd with busybox to load drivers
and an extended target fs in the NAND Flash with shell, libc,
many utilities, the graphical user interface Nano-X and some
sample programs for the Board Support Package of NetDCU11. Even
a modern and comfortable pre-configured cross-toolchain with
cross-debugger is part of the Board Support Package. |
|
| |
|
| Technical Data NetDCU11 |
| Power supply |
+5VDC/±5% |
| Current consumption |
<800mA (without display) |
| Touch-Screen |
4 wire, analogue resistive |
| Keyboard |
8 x 12 Matrix keyboard |
| In-/Output |
max. 21 E/A-Ports
alternative matrix keyboard
8 bit Extension interface (FS-Bus) |
| Serial ports |
3x RS232 (1x with RTS/CTS)
1x USB1.1 Host
1x USB1.1 Device
1x Ethernet 10/100 MBit
1x CAN2.0 |
| SD-Card-Slot |
1 Slot |
| LCD-Interface |
digital STN: up 640 x 480
Pixel, Single/Dual, 16 gray levels
CSTN: up 800 x 600 Pixel Single/Dual, 16/256 colors from
65536
TFT: up 800 x 600 Pixel, 256/64k colors |
| Audio |
AC97 Audio Codec On-Board |
| RAM |
64 MByte SDRAM, optional
128 MByte |
| Program memory |
64 MByte Flash |
| Processor |
PXA270 520MHz |
| Operating temperature |
0°C...70°C, optional
-25°C...85°C |
| Dimensions |
100mm x 80mm x 11mm (l
x b x h) |
| Weight |
55g |
| |
| |
|
