Products > SBC > F&S > PicoCOM > PicoCOM1
PicoCOM1
The PicoCOM1 is a small and inexpensive communication module with integrated operating system. An important design objective was to offer as many standardized interfaces as possible, completely supported by the integrated OS. This allows for fast and straightforward implementation of the required communication tasks without requiring any in-depth hardware knowledge. Integrating the module into the surrounding hardware should be equally uncomplicated.

Therefore the whole power-management (power supply, reset curcuitry) is provided on-board and the module is connected to the main application via a pluggable 80-pin connector. Only some signal driver components for the requested interfaces need to be added. The computing power is provided by a 210MHz ARM CPU. By default the PicoCOM1 is equipped with 32MB RAM, 32MB flash, and the board is already suited for extended temperature range (-20°C to +85°C).

Windows CE

The PicoCOM1 uses Windows Embedded CE 6.0. All interfaces are supported by software drivers. With Visual Studio .NET (not included), applications can be programmed in C, C++, C# and Visual Basic.
Embedded Linux

The Linux Evaluation Board Support Package (BSP) is already supplied with the starterkit. This package supports all basic interfaces and even allows development on a Windows PC. The additionally available Professional BSP offers the full capacity of the PicoCOM1 and development integration into the Eclipse IDE.

Technical Data PicoCOM1

Power supply

+3,3VDC / ±5%

Current consumption

< 400mA

In-/Output

max. 42 I/O-port lines

(alternative with interfaces allocated)

Touch-Screen

Interfaces

1x Ethernet 10/100 MBit

3x Serial

(RS232/RS485 with 3,3V-level)

2x USB2.0 Host

1x USB2.0 Device

1x I2C

1x SPI

1x CAN2.0

1x SD-Card-Slot (external)

1x Audio (Line in/out, analogue)

max. 3 analogue inputs

(alternative with I/O-ports allocated)

LCD-Interface

RAM

32 MByte SDRAM Opt. 64 MByte

Program memory

32 MByte Flash Opt. 64 MByte

CPU

ARM926EJ-S Core, 210MHz

Operating temperature

-20°C ... 85°C

Dimensions

50mm x 40mm x 10mm (l x w x h)

Weight

ca. 15 gr
 
Contact Brelco for more information.