|
The core of the PicoMOD3 is a Samsung ARM9 CPU with 533MHz. 64MB
flash and 64MB RAM are available. And it is equally well equipped
on the peripheral side: 4x serial, 2x USB2.0 (high speed), I²C,
SPI, I/O, Audio, CAN2.0, Ethernet, SD and CF card and touch controller.
In addition, the PicoMOD3 offers the same flexible display interface
as is typical with F&S boards. All common STN, CSTN and TFT
displays from 320x240 to 800x600 (SVGA) can be connected. The power
supply of the PicoMOD3 is 3.3V/400mA. Naturally for all these interfaces
there are software drivers included in the integrated operating
system, Windows CE or Linux. A robust 140-pin connector is used
to plug the PicoMOD3 onto the carrier board of the customer application.
|
 |
Windows CE
Reuse your Windows know-how! Implement your software with
Visual Studio .NET (not included in the starterkit) in the
programming languages C, C++, C# or VB.NET. Windows Embedded
CE 6.0 in connection with Compact Framework 2.0 build the
ideal starting point for your software development on the
PicoMOD3. Use interfaces like I²C in the same way as
a serial port without having to deal with the underlying hardware.
Configure the display and other settings with the F&S
configuration tool. That's how easy software development can
be.
|
|
|
| |
Embedded Linux
The Board Support
Package (BSP) is tuned especially to the hardware of the PicoMOD3
board. With improved U-Boot bootloader including a very comfortable
LCD selection, current Linux kernel and drivers for all supported
interfaces, several utilities and examples, this package proves
to be cutting-edge technology. Naturally the adapted cross-compiler
toolchain with debugger are also included and the software
development can comfortably take place under the Eclipse environment.
|
|
| Power supply |
+3,3VDC/±5% |
| Current consumption |
<400mA (without display) |
| In-/Output |
max. 64 I/O-Ports
8 bit extended interface (FS-Bus) |
| Keyboard |
matrix |
| Touch-Screen |
4 wire, analog resistive |
| Interfaces |
max. 4x Serial (RS232 mit
3,3V-Pegeln)
1x USB2.0 Host (High Speed)
1x USB1.1 Host or USB2.0 Device (High Speed)
1x Ethernet 10/100 MBit
1x CAN2.0
1x I2C
1x SPI
1x SD-Card
1x CF-Card |
| Audio |
1x Line-In (Stereo)
1x
Line-Out (Stereo)
1x Mic-In (Mono) |
| LCD-Interface |
STN: up 640 x 480 Pixel,
Single/Dual, 16 gray levels
CSTN: up 640 x 480 Pixel Single/Dual, 16/256 colors from
65536
TFT: up 800 x 600 Pixel, 256/65536 colors |
| RAM |
64 MByte mobile DDR-RAM |
| Program
memory |
64 MByte Flash |
| CPU |
S3C2443 with 533MHz |
| Operating temperature |
-20°C...85°C |
| Dimensions |
80mm x 50mm x 9mm (L x B
x H) |
| Weight |
ca. 20g |
|
