Brelco Srl - F&S Products

PicoMOD1

The first product of the PicoMOD family is PicoMOD1. This module (80x50 mm) is based on a ARM9 CPU from Samsung and runs at clock speed of 400 MHz. PicoMOD1 offers 32 MB of Flash memory, 32 MB of RAM memory, interfaces for 3 serial lines, 2 USB (host/device), I2C, I/O, sd-card and ethernet. Additionally it offers the same flexible display interface as all products from F&S. All STN-, CSTN- and TFT- displays with size up to 640x480 can be connected.

PicoMOD1 needs 3,3 V. All signals are located on a single connector eith 80 pins. For fast and easy development we have developed a complex base-board which is part of the starter-kit (SKIT). Use this kit to check the performance of the CPU and/or check the following interfaces: battery backed up RTC, four/five wire touch controller, LC driving voltage (5-30V), USB-Hub, RS232/485, ethernet, SD card, USB device, I2C, 5 digital I/O and LCD display.

Windows CE

Continue using your Windows know-how! Build your software with VisualStudio .NET in the languages C++, C#, or VB.NET. Windows CE 5.0, theCompact Framework and PicoMOD1 build the basis for your softwaredevelopment. Use interfaces like I²C in the same way as RS232, withouthaving to deal with the underlying hardware. Configure externalinterrupts (level/edge) or the display with the F&S configuration tool. With PicoMOD1, Windows CE is just simple. Start now!

Embedded Linux

The BSP contains the bootloader u-Boot with a comfortable LCD-selection, the linux kernel 2.6.11 with all needed drivers for LCD, touchpanel, NOR and NAND flash, ethernet, RTC and audio AC97. Furthermore an initrd with busybox for loading drivers and an extended target fs in the NAND flash with shell, libc, numerous utilities, grafical surface nano-X as well as some example programs are part of the delivered package. A modern and comfortable preinstalled cross-toolchain with cross-debugger is also contained.

Technical Data PicoMOD1

Power supply	+3,3VDC/±5%
Current consumption	<450mA
In-/Output	max. 54 I/O-Ports (shared with other interfaces)
Touch-Screen	four or five wire touch (I2C), external circuit needed
Interfaces	1x Ethernet 10/100 MBit 3x Serial (1x mit RTS/CTS) 1x USB 1.1 Host 1x USB 1.1 Device 1x I2C 1x SD-Card-Slot (external)
LCD-Interface	STN: up 640 x 480 Pixel, Single/Dual, 16 gray levels CSTN: up 320 x 240 Pixel Single/Dual, 16/256 colors from 65536 TFT: up 640 x 480 Pixel, 256/65536 colors
RAM	32 MByte SDRAM, optional 64/128 MByte
Program memory	32 MByte Flash, optional 32/64/128 MByte
CPU	S3C2440-400
Operating temperature	0°C...70°C, optional -25°C...85°C
Dimensions	80mm x 50mm x 9mm (l x b x h)
Weight	ca. 20g

Contact Brelco for more information.